Brand: Daessy
Model: DLRMRT
A basic mount with a right-angled tube and locking frame clamp outer assembly.Overview
A sturdy and cost-effective mounting solution.
Allows the mount to be attached in a secure position on either side of the wheelchair.
Supplied with Locking Outer Assembly to secure the mount in position.
S..
£438.00
Ex Tax:£365.00
Brand: Daessy
Model: DLRM
A 2-piece Rigid Mount, the upright tube is supplied with a 3”
S-bend as standard to allow more precise positioning to be achieved and
navigate around obstacles (trays, armrests etc.). The Locking Outer
Assembly allows the removable mount to be ‘locked’ onto the frame clamp
so that it is..
£571.20
Ex Tax:£476.00
Brand: Daessy
Model: B/DTSFM
An alternate version of the DTSFM with black tubes for a sleek all-black appearance.Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requirements. Featu..
£974.40
Ex Tax:£812.00
Brand: Daessy
Model: DTSFM
Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requirements. Featuring the Daessy locking clamp assembly, allowing the mount to be
‘locked’ into the..
£950.40
Ex Tax:£792.00
Brand: Daessy
Model: DSAM4
The Swing-Aside Mount enables the user to swing the
mount and device away when not needed without needing to rely on care
staff by releasing the cable beneath the horizontal tube and pushing the
mount away. It rotates at the elbow joint so the horizontal tube and
top part of the connector sw..
£938.40
Ex Tax:£782.00
Brand: Daessy
Model: DPM9
The Positioner Mount is a tremendously adjustable
and versatile mount. It combines 16 inches/40cm of height adjustment
with two articulating / rotating joints to allow pinpoint positioning
of a device.This mount is also supplied with the Daessy Locking Outer Assembly for height adjustment,
a..
£1,029.60
Ex Tax:£858.00
New
Brand: Daessy
Model: DACM-2
This new mount uses Daessy Adjustable Tube Connectors (ATC87/87), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£618.00
Ex Tax:£515.00
New
Brand: Daessy
Model: DACM-3
This new mount uses Daessy Adjustable Tube Connectors (ATC87/87), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£822.00
Ex Tax:£685.00
Brand: Daessy
Model: AH/DRM
A height-adjustable version of the 2-piece Rigid Mount. The telescoping
tube is locked into place with an easy to use handle and can be set at
the precise height required, making it particularly suitable when the
height of the mount may need frequent adjustment. The Locking Height Adjust Clamp..
£896.40
Ex Tax:£747.00
Brand: Daessy
Model: AH/DFM
A height-adjustable version of the Side-Folding Mount. The telescoping
tube is locked into place with an easy to use handle and can be set at
the precise height required, making it particularly suitable where the
height of the mount may need frequent adjustment. It is quick and easy
to ..
£1,274.40
Ex Tax:£1,062.00
Brand: Daessy
Model: M75-RTM
A basic and cost effective one-piece mount, the M-Series Bent Pole Mount
is available with a choice of 2 different sized right angle tubes and
uses the MQR75 quick release base. As with all M-Series mounts the frame
clamp is supplied with a locking mechanism as standard.OverviewBasic, single "..
£354.00
Ex Tax:£295.00
Brand: Daessy
Model: M75-RM
This 2-piece version of the Rigid Mount is supplied with the upright
tube in S-bent tube as standard. As with
all M-Series mounts the frame clamp is supplied with a locking mechanism
as standard.Overview
Same design as the standard Locking Rigid Mount (DLRM) in smaller, lighter form.Fi..
£559.20
Ex Tax:£466.00
Brand: Daessy
Model: B/M75-FM
Featuring black tubes for a sleek all-black appearance. A lightweight version of the highly popular standard series Locking Side
Folding Mount. The mount can be folded down to the side of the
wheelchair when not in use or when removed from the clamp assembly
making it more compact for transpor..
£974.40
Ex Tax:£812.00
Brand: Daessy
Model: M75-FM
A lightweight version of the highly popular standard series Locking Side
Folding Mount. The mount can be folded down to the side of the
wheelchair when not in use or when removed from the clamp assembly
making it more compact for transport or storage. Ideal for mid-size
devices up to 4kg, it..
£950.40
Ex Tax:£792.00
Brand: Daessy
Model: M75-AM
A highly adjustable mount with adjustable joints and height
adjustment, based on the larger standard series Positioner Mount. Ideal
for mid-size devices up to 4kg, it is available with a choice of either
the M-Series standard quick release base (MQR75) or any of the M-Series
articulating qui..
£1,284.00
Ex Tax:£1,070.00
New
Brand: Daessy
Model: M75-ACM-2
This new mount uses Daessy Adjustable Tube Connectors (ATC75/75), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£618.00
Ex Tax:£515.00
New
Brand: Daessy
Model: M75-ACM-3
This new mount uses Daessy Adjustable Tube Connectors (ATC75/75), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£822.00
Ex Tax:£685.00
New
Brand: Daessy
Model: M75-PPM
The Push-Pull Mount is designed to give flexibility and independence
to users who can move a mount out of the way unaided. Depending on the
orientation that the adaptor is attached to the upright tube it can be
used either to allow the mount to be pushed away (when it can be swung
up t..
£948.00
Ex Tax:£790.00
Brand: Daessy
Model: LM-A/LQR
3-Length LiteMount with adjustable ball joints and Lite Quick-Release Base designed to hold
lightweight devices such as tablets. The ball joints are adjusted via allen key as
standard.Suitable for devices up to 1.5kg. The maximum device weight is reduced to 1kg if using the optional handle kit.M..
£426.00
Ex Tax:£355.00
Brand: Daessy
Model: LM-I/LQR
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and an Articulating Quick-Release Base (small face), for use with tablets. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-k..
£486.00
Ex Tax:£405.00
Brand: Daessy
Model: LM2-I/LQR
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and an Articulating Quick-Release Base (small face), for use with tablets. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be car..
£429.60
Ex Tax:£358.00
Brand: Daessy
Model: LM-C/LQR
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version is suitable for
tablet devices up to 2kg, ..
£477.60
Ex Tax:£398.00
Brand: Mounts & More / Daessy
Model: MINF-SA
This new floor stand has been built with a
small footprint base and a
short adjustable arm, allowing a direct access or switch operated
device (under 2kg) to be positioned close enough for most users. The base, designed and manufactured by Mounts and
More, is low enough and narrow enough to ..
£984.00
Ex Tax:£820.00
Brand: Mounts & More / Daessy
Model: MINF-FA8
This new floor stand has been built with a
small footprint base and a
short fixed arm, allowing a direct access or switch operated device
(under 4kg) to be positioned close enough for most users. The base, designed and manufactured by Mounts and
More, is low enough and narrow enough to enabl..
£969.60
Ex Tax:£808.00
Brand: Mounts & More / Daessy
Model: MINF-LA
This version of the Mini Floorstand
features a longer adjustable arm, allowing a smaller device (up to 2kg) to be
positioned over a bed. The small footprint base, designed and
manufactured by Mounts and More, will fit under the side of any bed with
a clearance of 3.125" (8cm).Please note: Th..
£1,062.00
Ex Tax:£885.00
Brand: Daessy
Model: DM17
The 2017 Style Daessy Deskmount is an updated design on the original DM
(now DMU), allowing a device to be positioned on a desk or table at the
same orientation as it is on a wheelchair. The Deskmount consists of a
solid base with a newly designed adjustable arm and dedicated large
faced Qui..
£468.00
Ex Tax:£390.00
Brand: Daessy
Model: DM17-SF
The 2017 Style Small-Faced Daessy Desk Mount is an updated design on the
original DM (now DMU), allowing a device to be positioned on a desk or
table at the same orientation as it is on a wheelchair. This Deskmount
consists of a solid base with a newly designed adjustable arm and
dedicated s..
£390.00
Ex Tax:£325.00
Brand: Daessy
Model: DMLU
The original Large Daessy Desk Mount featuring an angle adjustable U-Tube and choice of Quick-Release Base. This version has the bigger base and U-Tube to support larger devices...
£588.00
Ex Tax:£490.00
Brand: Daessy
Model: DMU
The original Daessy Desk Mount featuring an angle adjustable U-Tube and choice of Quick-Release Base...
£498.00
Ex Tax:£415.00
Brand: Daessy
Model: VDS
A taller Desk Mount with central positioning provides greater stability for larger devices. Particularly suitable for use with eyegaze systems.The Articulating Quick-Release Base is usually supplied with a large face but small face and wedge style are also available. Each has the option of 0, 1 or 2..
£606.00
Ex Tax:£505.00
Brand: Daessy
Model: XDS
Designed to fold into a compact shape for easier storage and transport. This desk stand uses smaller 3/4" diameter tube to aid the compact design and reduce weight, with 2-handle Quick-Release Bases supporting the easy adjustment...
£816.00
Ex Tax:£680.00
Brand: Daessy
Model: BDMU
This original Bolt-on Desk Mount with U-Tube is a solution when the most stable option
is required to mount on a solid surface such as a table/desk. This
mount is not free-standing on a base, instead being physically secured
to a surface with 6 screws (not supplied). The U-Tube angle can be ad..
£402.00
Ex Tax:£335.00
Brand: Daessy
Model: CDMU
Basic Daessy U-Tube and Quick-Release Base connected to a Manfrotto Superclamp for quick attachment to the edge of any suitable surface between 15mm and 50mm thick. The U-Tube angle can be adjusted with allen key.It can be supplied with choice of Quick-Release Base to customer preference...
£516.00
Ex Tax:£430.00
Brand: Daessy
Model: BDM17
A new design of the Bolt-on Desk Mount. This is an ideal solution
when the most stable option is required to mount on a solid surface such
as a table/desk. This mount is not free-standing on a base, instead
being physically secured to a surface with 6 screws (not supplied).The BDM17 can be sup..
£300.00
Ex Tax:£250.00
Brand: Daessy
Model: CDM17
Small-faced Quick Release Base on adjustable arm, connected to a Manfrotto Superclamp. The clamp can be attached to the edge of any suitable surface between 15mm and 50mm thick. Adjustment is by allen key and the mount features a 'toothed' lower joint for adjusting the arm angle while the Quick-Rele..
£408.00
Ex Tax:£340.00
Brand: Daessy
Model: SC-LDM
A lightweight Clamp-on desk mount featuring a Daessy Articulating
LiteMount arm and quick release base with a Manfrotto Superclamp. Handle
adjustment for both the quick release base and clamp.Suitable for lighter devices up to 1.5 kg...
£312.00
Ex Tax:£260.00
Model: MSPU-EYE
A UAG rugged case protects your Surface Pro and the adjustable eye
gaze camera bracket lets you attach a range of eye gaze cameras. Daessy
mounting plate included.
Turn your Microsoft Surface Pro tablet 4, 5, 6 or 7 into an eye gaze
controlled tablet with this holder (Surface Pro and eye ga..
£274.80
Ex Tax:£229.00
Model: S/MSPU
This holder for the Microsoft Surface Pro 4, 5, 6 and 7 enables
secure connection to a Daessy Quick Release Base on a mount. As a
'standard' holder it will
have a fixed orientation.Includes shoulder strap and flip stand...
£208.80
Ex Tax:£174.00
Model: T/MSPU
This holder for the Microsoft Surface Pro 4, 5, 6 and 7 enables
secure connection to a Daessy Quick Release Base on a mount. As a
'twist' holder it will rotate between portrait and landscape
orientation.Includes shoulder strap and flip stand.Note: Was RCT-MSPU..
£256.80
Ex Tax:£214.00
Model: T/MSP9
This holder for the Microsoft Surface Pro 9/10/11 enables
secure connection to a Daessy Quick Release Base on a mount. With a Standard attachment it will
have a fixed orientation...
£256.80
Ex Tax:£214.00
Model: S/MSP9
This holder for the Microsoft Surface Pro 9/10/11 enables
secure connection to a Daessy Quick Release Base on a mount. With a Standard attachment it will
have a fixed orientation...
£208.80
Ex Tax:£174.00
Model: MSP9-EYE
A UAG rugged case protects your Surface Pro 9, 10 and 11, and the adjustable eye
gaze camera bracket lets you attach a range of eye gaze cameras. Daessy
mounting plate included.
Turn your Microsoft Surface Pro tablet 9/10/11 into an eye gaze
controlled tablet with this holder (Surface Pro a..
£274.80
Ex Tax:£229.00
Model: S/MSGO
This holder for the Microsoft Surface Go (2018) and Go 2 (2020), Go 3 (2021) and Go 4 (2023) enables secure connection to a
Daessy Quick Release Base on a mount. With a Standard attachment it will
have a fixed orientation...
£208.80
Ex Tax:£174.00
Model: T/MSGO
This holder for the Microsoft Surface Go (2018) and Go 2 (2020), Go 3 and Go 4 enables secure connection to a
Daessy Quick Release Base on a mount. As a 'twist' holder it will rotate
between portrait and landscape orientation...
£256.80
Ex Tax:£214.00
Model: S/U-IPD22
A Unicorn protective case with built-in screen protector for the iPad 10.9" (model released in 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older generation iPad ..
£166.80
Ex Tax:£139.00
Model: S/U-IPRO20-12
A Unicorn protective case with built-in screen protector for the iPad Pro 12.9" (model released in 2020), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older generation i..
£166.80
Ex Tax:£139.00
Model: S/U-IPRO21-12
A Unicorn protective case with built-in screen protector for the iPad Pro 12.9" (models released in 2021 and 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older ge..
£166.80
Ex Tax:£139.00
Model: T/U-IPD22
A Unicorn protective case with built-in screen protector for the iPad Air 10.9" (model released in 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape. Note: Not compatible with the older ..
£256.80
Ex Tax:£214.00
Model: T/U-IPRO20-12
A Unicorn protective case with built-in screen protector for the iPad Pro 12.9" (model released in 2020), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape.Note: Not compatible with the older g..
£256.80
Ex Tax:£214.00
Model: T/U-IPRO21-12
A Unicorn protective case with built-in screen protector for the iPad Pro 12.9" (models released in 2021 and 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape.Note: Not compatible with t..
£256.80
Ex Tax:£214.00
Model: S/U-IPRO20-11
A Unicorn protective case with built-in screen protector for the iPad Pro 11" (models released in 2020, 2021 and 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the olde..
£166.80
Ex Tax:£139.00
Model: T/U-IPRO20-11
A Unicorn protective case with built-in screen protector for the iPad Pro 11" (models released in 2020, 2021 and 2022), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape.Note: Not compatible wi..
£256.80
Ex Tax:£214.00
Model: S/U-IPDA20
A Unicorn protective case with built-in screen protector for the iPad Air 10.9" (models released in 2020 and 2022), adapted to attach to a
Daessy Quick Release Base. Also fits the 11" iPad Air 2024. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note:..
£166.80
Ex Tax:£139.00
Model: S/U-IPDA24-13
A Unicorn protective case with built-in screen protector for the 2024 iPad Air 13". The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older generation iPad Air models due to different design/button location etc...
£166.80
Ex Tax:£139.00
Model: T/U-IPDA20
A Unicorn protective case with built-in screen protector for the iPad Air 10.9" (models released in 2020 and 2022), adapted to attach to a
Daessy Quick Release Base. Also fits 11" iPad Air 2024. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscap..
£256.80
Ex Tax:£214.00
Model: T/U-IPDA24-13
A Unicorn protective case with built-in screen protector for the 13" iPad Air 2024. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape.Note: Not compatible with the older generation iPad Air models due to different design/button location etc...
£256.80
Ex Tax:£214.00
Model: S/U-IPD19
A Unicorn protective case with built-in screen protector for the iPad 10.2" (models released in 2019, 2020 and 2021), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older ..
£166.80
Ex Tax:£139.00
Model: T/U-IPD19
A Unicorn protective case with built-in screen protector for the iPad Air 10.2" (models released in 2019, 2020 and 2021), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH/TWIST Adaptor allows the iPad to be turned whilst on the mount from portrait to landscape.Note: Not compatible ..
£256.80
Ex Tax:£214.00
Model: S/U-IPDM6
A Unicorn protective case with built-in screen protector for the iPad Mini 6 (released in 2021) and 7 (2024), adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with the older generati..
£166.80
Ex Tax:£139.00
Model: S/U-IPRO24-13
A Unicorn protective case with built-in screen protector for the 2024 13" iPad Pro, adapted to attach to a
Daessy Quick Release Base. The Daessy IPH Adaptor allows the iPad to be
attached to the mount in portrait or landscape.Note: Not compatible with other generations of iPad Pro models due to ..
£166.80
Ex Tax:£139.00