Brand: Daessy
Model: UFC1000IP
Clamps onto 1" round frame tubing without sleeves.The UFC1000IP is also used with different size sleeves to create the following clamps:UFC750IP = UFC1000IP with sleeves for 3/4" round frame
UFC875IP = UFC1000IP with sleeves for 7/8" round frame
UFC1000IP = UFC1000IP with no sleeves
UFC20IP = UFC..
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC875IP
Clamps onto 7/8" round frame clamp tubing. Consists of a UFC1000IP with sleeves, adapting the clamp to fit 7/8" tube...
£156.00
Ex Tax:£130.00
Brand: Daessy
Model: UFC1125IP
Clamps onto 1.125" round frame clamp tubing...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC1250IP
Clamps onto 1.25" round frame clamp tubing. New design/shape as of 2020...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC1500IP
Clamps onto 1.5" round frame clamp tubing. New design/shape as of 2020...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC1000IPMOD
Narrow frame clamp inner piece for 1" round tube, modified...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: N1SMIP
Narrow side mount frame clamp inner piece for 1" round tube...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: INVMOD/IPA
Attaches to the Invacare Modulite
rail with 3 fixings for extra security and strength...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFCRTIP
Clamps onto 0.75" x 1.5" rectangular frame tube...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFCPRTC
Clamps onto 2.5" x 1.25" rectangular frame tube...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC20-40
Clamps onto rectangular frame 20mm - 40mm deep. This clamp was formerly listed with the code UFCPUMA...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 35IVSMIP
Clamps onto rectangular frame with dimensions 35mm x 20mm...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 40IVSMIP
Clamps onto rectangular frame with dimensions 40mm x 20mm...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: IPA
Used to bolt onto various other clamps to provide the interface for connecting other mount components or as a frame clamp on its own when bolted directly onto a suitable frame...
£51.60
Ex Tax:£43.00
Brand: Daessy
Model: IPA/TNUT
Used to bolt onto the rail of various wheelchair frames...
£60.00
Ex Tax:£50.00
Brand: Daessy
Model: SH3/IPA
The slot in the SH3/IPA is 3.5” (9cm) long. The SH3/IPA is supplied with bolts to fit M6 threads in wheelchair frame...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: PA/IPA
Frame clamp inner piece for Permobil (not UniTrack)...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SEDEO/IPA
Frame clamp inner piece to attach onto the original Sunrise Sedeo armrest bracket. Note: the bracket is not included with this single clamp.Note: This is not for the new Q300/Q400/Q500 range of Sedeo frames...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SEDEO/IPA+BRACKET
Frame clamp inner piece and armrest bracket to attach onto the original Sunrise Sedeo. Note: this combination is only needed if you don't already have the Sedeo armrest bracket.Note: This is not for the new Q300/Q400/Q500 range of Sedeo frames...
£186.00
Ex Tax:£155.00
Brand: Daessy
Model: SALSA18/IPA
Frame clamp inner piece to attach onto the Quickie Salsa...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SALSA-EF/IPA
Frame clamp inner piece to attach onto a Quickie Salsa that has extended footrest brackets...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UTPA/IPA
Frame clamp inner piece to attach onto Permobil UniTrack...
£165.60
Ex Tax:£138.00
Brand: Daessy
Model: UTR82/IPA
Frame clamp inner piece to attach onto the R82 Cougar. Also fits Combiframe...
£76.80
Ex Tax:£64.00
Brand: Daessy
Model: INVSTD/IPA
A frame clamp inner piece for Invacare wheelchairs with the
"Standard" seat system (typically older TDX SP and XTR wheelchairs).
This 5 piece clamp featuring a Daessy IPA is attached to the seat pan
and anchored by the armrest support, giving a very solid base for
attaching a Daessy mount.
..
£165.60
Ex Tax:£138.00
Brand: Daessy
Model: Q3-4ADPT/IPA
Frame clamp inner piece to attach onto the new Sedeo Q300 and Q400 seat rail. An IPA is included for connection to the rest of the Daessy clamp assembly.Note: Some Q300s require the SALSA/IPA frame clamp inner piece. This is on models (usually childrens) that use the tie-down rather than the seat ra..
£151.20
Ex Tax:£126.00
Brand: Daessy
Model: QSPK5/IPA
Frame clamp inner piece to attach onto the new Sedeo Q500 seat rail.Caution: Must not be used on the Q300 or Q400. Please see the Q3-4ADPT for a frame clamp suitable for those seat rails...
£165.60
Ex Tax:£138.00
New
Brand: Daessy
Model: SANGO/IPA
Fits most models of Dietz Sango (except the Sango XL)...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: O3L
Allows Frame Clamp components (inner & outer) to be assembled
3” / 15cm apart. It is not recommended to use more than 2 x O3L (O3LS) in a
clamp assembly..
£96.00
Ex Tax:£80.00
Brand: Daessy
Model: O3LS
Allows Frame Clamp components (inner & outer) to be assembled
3” / 15cm apart with components assembled to face the same direction. It is not recommended to use more than 2 x O3L (O3LS) in a
clamp assembly..
£96.00
Ex Tax:£80.00
Brand: Daessy
Model: UFCSPCR
The spacer inserts between 2 frame clamp components and extends the
width of the clamp assembly by ¾” (1.9cm) to miss obstructions above
where the clamp assembly fits. It is possible to combine 2 x UFCSPCR to
increase the width by 1.5” (3.8cm)...
£56.40
Ex Tax:£47.00
Brand: Daessy
Model: UFC90
Allows a frame clamp Outer Piece to be attached at 90 degrees to the Inner Piece...
£96.00
Ex Tax:£80.00
Brand: Daessy
Model: IP-IP
Adaptor/Link to connect two Standard Series frame clamp inner pieces together...
£40.80
Ex Tax:£34.00
Brand: Daessy
Model: UFCOP
Basic non-locking Frame Clamp Outer Piece for use with the Standard Series
Rigid Mount (DRM1), Bent-Pole Rigid Mount (DRMRT) or Side Folding Mount
(DFM2). This component is the outer piece of the frame clamp assembly
for those mounts and is attached to the rest of the frame clamp componen..
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: IC1
Outer connector for the Basic Standard Series Frame Clamp Assembly (non-locking) of the Rigid Mount (DRM1), Bent Pole Rigid Mount (DRMRT) or
Side Folding Mount (DFM2).This component is attached to the lower end
of the vertical tube of the mount and connects with the Basic Frame Clamp
Outer Pie..
£103.20
Ex Tax:£86.00
Brand: Daessy
Model: RFCR
Outer Piece for the Locking Frame Clamp assembly of Standard Series and M-Series Mounts.
Attached to a frame clamp inner piece (or link/spacer), this 'receiving' half of the
locking outer assembly has the blue-handled lock to secure the mount in
position. This Outer Piece is suitable for use w..
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: ROP
The outermost part of the Standard Series Locking Frame Clamp Assembly. Attached to the bottom of a mount's upright tube, the ROP connects with a
Locking Frame Clamp Outer Piece - Receiver (RFCR) to secure the mount
in position...
£103.20
Ex Tax:£86.00
Brand: Daessy
Model: AHOP
The outermost part of the Standard Series Locking Frame Clamp Assembly for Height Adjustable mounts. Attached to the bottom of a mount's upright tube, the AHOP connects with a
Locking Frame Clamp Outer Piece - Receiver (RFCR) to secure the mount
in position...
£116.40
Ex Tax:£97.00
Brand: Daessy
Model: RFCI
The outermost part of the Standard Series Locking Frame Clamp Assembly for the Rear Folding mount. Attached to the rear folding mechanism, the RFCI connects with a
Locking Frame Clamp Outer Piece - Receiver (RFCR) to secure the mount
in position on the wheelchair...
£51.60
Ex Tax:£43.00
Brand: Daessy
Model: ROP/RFCR
Both halves of the Locking Outer Assembly for Standard Series, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector (ROP).Used in the following Standard Series mounts:Locking Bent Pole Rigid Mount (DLRMRT)Locking Rigid Mount (DLRM)Locking Side Folding Mount (DT..
£230.40
Ex Tax:£192.00
Brand: Daessy
Model: AHOP/RFCR
Both halves of the Locking Outer Assembly for Standard Series Height Adjustable mounts, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector for Height Adjust (AHOP).Used in the following Standard Series mounts:Height Adjustable Rigid Mount (AH/DRM)Height Adjus..
£243.60
Ex Tax:£203.00
Brand: Daessy
Model: RFCI/RFCR
Both halves of the Locking Outer Assembly for the Standard Series Rear Folding Mount, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector for Rear Folding (RFCI).Used in the following Standard Series mounts:Locking Rear Folding Mount (DLRFM)..
£178.80
Ex Tax:£149.00