Standard Series mounts are suitable for communication devices and laptops up to 7kg in weight, or when the most robust mount is appropriate.
M-Series mounts use a smaller diameter tube, allowing the components to be made smaller and lighter. They are designed for devices weighing up to 4kg.
LiteMounts are suitable for smaller devices weighing under 2kg, such as iPads, cameras and switches.
Brand: Daessy
Model: DRMRT
A basic mount with a right-angled tube.Overview
A sturdy and cost-effective mounting solution.
Allows the mount to be attached in a secure position on either side of the wheelchair.
Can be repositioned using the indexing locating pin on the UFCOP/IC1, allowing easy access for the user.
Suita..
£342.00
Ex Tax:£285.00
Brand: Daessy
Model: DLRMRT
A basic mount with a right-angled tube and locking frame clamp outer assembly.Overview
A sturdy and cost-effective mounting solution.
Allows the mount to be attached in a secure position on either side of the wheelchair.
Supplied with Locking Outer Assembly to secure the mount in position.
S..
£438.00
Ex Tax:£365.00
Brand: Daessy
Model: DRM1
A 2-piece Mount, separate upright and horizontal tubes joined by a
corner/elbow connector. The upright tube is supplied with a 3” S-bend as
standard to allow more precise positioning to be achieved and navigate
around obstacles (trays, armrests etc.).OverviewA sturdy and cost-effective mo..
£463.20
Ex Tax:£386.00
Brand: Daessy
Model: DLRM
A 2-piece Rigid Mount, the upright tube is supplied with a 3”
S-bend as standard to allow more precise positioning to be achieved and
navigate around obstacles (trays, armrests etc.). The Locking Outer
Assembly allows the removable mount to be ‘locked’ onto the frame clamp
so that it is..
£559.20
Ex Tax:£466.00
Brand: Daessy
Model: B/DFM2
An alternate version of the DFM2 with black tube, giving the mount a sleek all-black appearance. Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requir..
£840.00
Ex Tax:£700.00
Brand: Daessy
Model: DFM2
Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requirements. This
non-locking version utilises the original Daessy clamp assembly.OverviewFolds from..
£816.00
Ex Tax:£680.00
Brand: Daessy
Model: B/DTSFM
An alternate version of the DTSFM with black tubes for a sleek all-black appearance.Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requirements. Featu..
£936.00
Ex Tax:£780.00
Brand: Daessy
Model: DTSFM
Compact and portable, designed to fold by the side of the chair when not
in use and for easier transportation. The upright and horizontal tubes
can be supplied in different lengths to customer requirements. Featuring the Daessy locking clamp assembly, allowing the mount to be
‘locked’ into the..
£912.00
Ex Tax:£760.00
Brand: Daessy
Model: DSAM4
The Swing-Aside Mount enables the user to swing the
mount and device away when not needed without needing to rely on care
staff by releasing the cable beneath the horizontal tube and pushing the
mount away. It rotates at the elbow joint so the horizontal tube and
top part of the connector sw..
£896.40
Ex Tax:£747.00
Brand: Daessy
Model: DPM9
The Positioner Mount is a tremendously adjustable
and versatile mount. It combines 16 inches/40cm of height adjustment
with two articulating / rotating joints to allow pinpoint positioning
of a device.This mount is also supplied with the Daessy Locking Outer Assembly for height adjustment,
a..
£993.60
Ex Tax:£828.00
Brand: Daessy
Model: DACM-2
This new mount uses Daessy Adjustable Tube Connectors (ATC87/87), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£606.00
Ex Tax:£505.00
Brand: Daessy
Model: DACM-3
This new mount uses Daessy Adjustable Tube Connectors (ATC87/87), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£810.00
Ex Tax:£675.00
Brand: Daessy
Model: AH/DRM
A height-adjustable version of the 2-piece Rigid Mount. The telescoping
tube is locked into place with an easy to use handle and can be set at
the precise height required, making it particularly suitable when the
height of the mount may need frequent adjustment. The Locking Height Adjust Clamp..
£873.60
Ex Tax:£728.00
Brand: Daessy
Model: AH/DFM
A height-adjustable version of the Side-Folding Mount. The telescoping
tube is locked into place with an easy to use handle and can be set at
the precise height required, making it particularly suitable where the
height of the mount may need frequent adjustment. It is quick and easy
to ..
£1,226.40
Ex Tax:£1,022.00
Brand: Daessy
Model: M75-RTM
A basic and cost effective one-piece mount, the M-Series Bent Pole Mount
is available with a choice of 2 different sized right angle tubes and
uses the MQR75 quick release base. As with all M-Series mounts the frame
clamp is supplied with a locking mechanism as standard.OverviewBasic, single "..
£345.60
Ex Tax:£288.00
Brand: Daessy
Model: M75-RM
This 2-piece version of the Rigid Mount is supplied with the upright
tube in S-bent tube as standard. As with
all M-Series mounts the frame clamp is supplied with a locking mechanism
as standard.Overview
Same design as the standard Locking Rigid Mount (DLRM) in smaller, lighter form.Fi..
£547.20
Ex Tax:£456.00
Brand: Daessy
Model: B/M75-FM
Featuring black tubes for a sleek all-black appearance. A lightweight version of the highly popular standard series Locking Side
Folding Mount. The mount can be folded down to the side of the
wheelchair when not in use or when removed from the clamp assembly
making it more compact for transpor..
£939.60
Ex Tax:£783.00
Brand: Daessy
Model: M75-FM
A lightweight version of the highly popular standard series Locking Side
Folding Mount. The mount can be folded down to the side of the
wheelchair when not in use or when removed from the clamp assembly
making it more compact for transport or storage. Ideal for mid-size
devices up to 4kg, it..
£915.60
Ex Tax:£763.00
Brand: Daessy
Model: M75-AM
A highly adjustable mount with adjustable joints and height
adjustment, based on the larger standard series Positioner Mount. Ideal
for mid-size devices up to 4kg, it is available with a choice of either
the M-Series standard quick release base (MQR75) or any of the M-Series
articulating qui..
£1,278.00
Ex Tax:£1,065.00
Brand: Daessy
Model: M75-ACM-2
This new mount uses Daessy Adjustable Tube Connectors (ATC75/75), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£609.60
Ex Tax:£508.00
Brand: Daessy
Model: M75-ACM-3
This new mount uses Daessy Adjustable Tube Connectors (ATC75/75), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount ..
£813.60
Ex Tax:£678.00
Brand: Daessy
Model: M75-PPM
The Push-Pull Mount is designed to give flexibility and independence
to users who can move a mount out of the way unaided. Depending on the
orientation that the adaptor is attached to the upright tube it can be
used either to allow the mount to be pushed away (when it can be swung
up t..
£910.80
Ex Tax:£759.00
Brand: Daessy
Model: LM-A/LQR
3-Length LiteMount with adjustable ball joints and Lite Quick-Release Base designed to hold
lightweight devices such as tablets. The ball joints are adjusted via allen key as
standard.Suitable for devices up to 1.5kg. The maximum device weight is reduced to 1kg if using the optional handle kit.M..
£417.60
Ex Tax:£348.00
Brand: Daessy
Model: LM-A/PHONE
3-Length LiteMount with adjustable ball joints and end fitting designed to hold phones. The ball joints are adjusted via allen key as
standard.Mount includes 3 tubes and 3 double ball joints with an overall length of 28" as standard. Other lengths available on request.Optional End-Fittings
End fi..
£416.40
Ex Tax:£347.00
Brand: Daessy
Model: LM-A/SW
3-Length LiteMount with adjustable ball joints designed to hold switches. The ball joints are adjusted via allen key as
standard.Weight support up to 1.5kg. The maximum device weight is reduced to 1kg if using the optional handle kit.Mount includes 3 tubes and 3 double ball joints with an overall ..
£363.60
Ex Tax:£303.00
Brand: Daessy
Model: LM-A/CAM
3-Length LiteMount with adjustable ball joints designed to hold smaller cameras. The ball joints are adjusted via allen key as
standard. Manfrotto 323 camera end fitting allows quick attachment or removal of the camera.Suitable for devices up to 1.5kg. The maximum device weight is reduced to 1kg i..
£412.80
Ex Tax:£344.00
Brand: Daessy
Model: LM-A/THF
3-Length LiteMount with adjustable ball joints designed to hold smaller devices using 1/4" camera thread for attachment (such as various environmental control units). The ball joints are adjusted via allen key as
standard.Suitable for devices up to 1.5kg.Mount includes 3 tubes and 3 double ball jo..
£352.80
Ex Tax:£294.00
Brand: Daessy
Model: LM-I/LQR
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and an Articulating Quick-Release Base (small face), for use with tablets. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-k..
£475.20
Ex Tax:£396.00
Brand: Daessy
Model: LM-I/PHONE
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and an adjustable phone end fitting. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-key to
change positioning.Suitable fo..
£474.00
Ex Tax:£395.00
Brand: Daessy
Model: LM-I/SW
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and either Buddy Button or JellyBean switch end fitting. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-key to
change pos..
£421.20
Ex Tax:£351.00
Brand: Daessy
Model: LM-I/CAM
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and Manfrotto 323 Camera end fitting. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-key to
change positioning.Supports u..
£470.40
Ex Tax:£392.00
Brand: Daessy
Model: LM-I/THF
3-Length LiteMount with 2 indexed (hirth-coupling) adjustable joints
and a 1/4" thread end fitting. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with the joints adjusted by allen-key to
change positioning.Supports devices ..
£410.40
Ex Tax:£342.00
Brand: Daessy
Model: LM2-I/LQR
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and an Articulating Quick-Release Base (small face), for use with tablets. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be car..
£408.00
Ex Tax:£340.00
Brand: Daessy
Model: LM2-I/PHONE
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and an adjustable phone holder. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with ..
£406.80
Ex Tax:£339.00
Brand: Daessy
Model: LM2-I/SW
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and either Buddy Button or JellyBean switch end fitting. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Art..
£354.00
Ex Tax:£295.00
Brand: Daessy
Model: LM2-I/CAM
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and Manfrotto 323 Camera end fitting. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, ..
£403.20
Ex Tax:£336.00
Brand: Daessy
Model: LM2-I/THF
2-Length LiteMount with 1 indexed (hirth-coupling) adjustable joint
and a 1/4" thread end fitting. This shorter 2-Length version is more suited to mounting onto seat frame. The hirth joints
are 'toothed' for solid fixing, allowing more weight to be carried than
the Articulating version, with th..
£343.20
Ex Tax:£286.00
Brand: Daessy
Model: LM-C/LQR
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version is suitable for
tablet devices up to 2kg, ..
£464.40
Ex Tax:£387.00
Brand: Daessy
Model: LM-C/PHONE
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version includes an adjustable phone holder.
Suit..
£463.20
Ex Tax:£386.00
Brand: Daessy
Model: LM-C/SW
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version is suitable for switches.
Suitable for sw..
£410.40
Ex Tax:£342.00
Brand: Daessy
Model: LM-C/CAM
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version is suitable for cameras up to 2kg using with..
£459.60
Ex Tax:£383.00
Brand: Daessy
Model: LM-C/THF
3-Length LiteMount combining an Indexing clamp as the first joint for
extra strength and two articulating joints for adjustability higher up.
The ball joints are adjusted via allen key as standard, with a 2-handle
kit an optional extra. This version is suitable for
devices up to 2kg using 1/..
£399.60
Ex Tax:£333.00
Showing 1 to 42 of 42 (1 Pages)