Menu
Your Cart

Rigid Mount

Rigid Mount
Rigid Mount

A 2-piece Mount, separate upright and horizontal tubes joined by a corner/elbow connector. The upright tube is supplied with a 3” S-bend as standard to allow more precise positioning to be achieved and navigate around obstacles (trays, armrests etc.).

Overview

  • A sturdy and cost-effective mounting solution.
  • Allows the mount to be attached in a secure position and positions the device precisely where required.
  • Can be repositioned using the locating pin on the UFCOP/IC1, allowing easy access for the user.
  • Fits either side of the wheelchair.
  • Suitable for most standard wheelchairs.
  • Quickly removed from the wheelchair.
  • Supplied as standard with 16” straight horizontal tune and 24” vertical tube with 3” S-bend. Different lengths of tube are available if required and can be specified with your order. Click here to see the range of available S-Bent tube.
  • Suitable for devices up to 8kg.
  • The upright tube must not be installed 15 degrees beyond vertical (forwards or backwards).
  • Not suitable for tilt-in-space wheelchairs. If tilted back it is possible for the mount to come loose and swing back towards the user.

Components*

  • 1x Vertical S-Bent Tube (S24-3 as standard)
  • 1x Horizontal Straight Tube (16" as standard)
  • 1x 90 degree Tube Connector (TC90)
  • 1x Indexing Frame Clamp Outer Piece (UFCOP)
  • 1x Index Clamp (IC1)

* Components listed above are for standard configuration. Exact components may differ slightly to meet specific requirements.

Frame Clamp Inner Piece and Quick-Release Base (From Feb 2023)

We no longer include a Frame Clamp Inner Piece or Quick-Release Base in a mount by default. With changes to wheelchairs and other equipment over the years there is now a wide variety and it is no longer appropriate for a 1" round frame clamp and standard TUSB to be a default inclusion.

When ordering a full mount the Frame Clamp Inner Piece and Quick-Release Base are to be ordered separately, with our full range available.

Wheelchair Information and Custom Requirements

We ask for details of the Wheelchair the mount is intended to be used with in order to ensure that the supplied Frame Clamp is correct for that chair.

Product Overview
Product Type Wheelchair Mount
Mount Series Standard Series
Mount Style Rigid
Product Details
Max Weight Support 7kg
Frame Clamp Assembly Basic
Device Support
Direct Access Devices 4.1 - 7.0 kg Yes
Direct Access Devices 2.1 - 4.0 kg Yes
Tablets / Small Devices 1.6 - 2.0 kg Yes
Wired Switch Access Devices 4.1 - 7.0 kg Yes
Tablets / Small Devices 1.0 - 1.5 kg Yes
Wired Switch Access Devices 2.1 - 4.0 kg Yes
Tablets / Small Devices up to 1.0 kg Yes
Wireless Switch Access Devices 4.1 - 7.0 kg Yes
Wireless Switch Access Devices 2.1 - 4.0 kg Yes
£463.20
Ex Tax: £386.00
  • Model: DRM1

Available Options

We use basic cookies for the functionality of our website. We do not use any tracking cookies that would follow your activity outside our site.

You can view our Privacy Policy in full for further information. By continuing to use this site you are agreeing to our use of cookies.