VESA Quick Release Base/Mounting Plate
Mounting Plates for DaeSSy™ Quick Release Bases

TUSB

TUSB
Clamp at any angle onto 7/8” Tube

TUSBA

TUSBA

TUSBA
Clamp at any angle on 7/8” Tube
Sideways adjustable

TUSBS

TUSBS
Clamp onto vertical Tube
Set the angle to suit

USBF

USBF
Clamp onto horizontal 7/8” Tube
Change the angle at any time (90 deg in 6 stops)

VUSB
Vesa Quick Release Base
£80 exVAT €120 exVAT
Attaches to a VESA mounting support, use to attach any device with a DaeSSy Mounting Plate.
New Product

VMP
VESA Mounting Plate
£80 exVAT €120 exVAT
Attach a VESA compatible device such as a Monitor to a DaeSSy Quick Release
New Product

QRP1
Quick Release Plate
£55.00 € 82.50
For Customer
adaptations, MyTobii, etc

MDMT
Basic Mounting Plate
£55.00 € 82.50
For Customer
adaptations

CBOX40
Chatbox 40 Holder
£80.00 € 120.00

DMO
Dynamo Holder
£80.00 € 120.00

DMYTE
Dynamyte 3 Holder
£80.00 € 120.00

DYNDMT4
Dynamyte 4 Plate
£80.00 € 120.00

DYN2
Dynavox 2 Holder
£85.00 € 130.00

DYN3100
Dynavox 3100 Plate
£80.00 € 120.00

DYNDV4
Dynavox 4 Plate
£80.00 € 120.00

DYNVM5
Dynavox 5/V Max Plate
£80 exVAT €120 exVAT
Faults with Non-DaeSSy Dynavox 5/Vmax/M3 mounting plates
Some customers are reporting faults with the DYNVM5 mounting plate for the Dynavox 5/Vmax/M3. In all cases reported so far, the mounting plate has turned out not to be DaeSSy (and therefore not supplied by us).
The genuine DaeSSy Mounting Plate for the Dynavox 5/Vmax/M3 is shown on the left. The other Mounting Plate is shown here:

Faults relating to the non-DaeSSy Mounting Plate should be reported to the supplier, not Mounts & More Ltd.

DWTE
DynaWrite Plate
£80.00 € 120.00

ECLIPSE
Eclipse Holder
£75.00 € 115.00

ETALK
ETalk Plate
£80.00 € 120.00

4TALK4
4Talk4 & Scan4 Plate
£85.00 € 130.00

DaeSSy Laptop Holder
£175.00 € 263.00
Custom-made Holders to attach Laptops and Notebooks to the DaeSSy Mounting System.
Made to customer specifications, the Holder comprises a polycarbonate plate (with DaeSSy Quick Release Plate attached) with stainless steel clips made to shape/size holding the Laptop onto the polycarbonate. The measurements required are described overleaf.
Note-the Laptop Holder will not protect the Laptop from damage in the event of collision when on the wheelchair mount.
Please click here for Measurements Needed to Make a Custom Laptop Holder.

LTRT35Q
LightWriter 35 Holder
£75.00 € 112.50

LTRT86Q
LightWriter 86 Holder
£125.00 € 190.00

MACAW
Macaw Holder
£85.00 € 130.00

MERC
Mercury Holder
£80.00 € 120.00

MIMERC
MiniMerc Holder
£80.00 € 120.00

POLY/Q
Polycarbonate Plate
£70.00 € 105.00
Stock size 6"x8" 15x20cm,
other sizes to order

PRC3
Prentke Romich Plate
£80.00 € 120.00
Fits all PRC Devices
since the Liberator

SISTAB
Say It Sam Holder
£80.00 € 120.00

TEC1
TechTalk/Scan Series 1
£85.00 € 130.00
Fits original TechTalk/Scan (overlay
inserted from the side)

TEC2
TechTalk/Scan Series 2
£85.00 € 130.00
Fits later TechTalk/Scan (overlay
inserted from the top)